This substantial 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for demanding suspending and bracing applications. Engineered for reliability in harsh environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.940" |
| Length | 43" |
| Width | 43" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a nominal thickness of 0.940 inches, with precise dimensions of 43 inches in length and 43 inches in width. Composed of a chromium-nickel alloy, it offers superior resistance to pitting, crevice corrosion, and general corrosion in a wide range of atmospheric and chemical environments. Its robust mechanical properties make it ideal for structural support, seismic bracing, and heavy-duty load-bearing components where long-term performance and integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and cut the sheet to the required dimensions for the specific bracing or suspending application. 2. Securely attach the sheet using appropriate fasteners (e.g., stainless steel bolts, rivets) designed for structural load-bearing. 3. Verify all connections are torqued to manufacturer specifications and ensure the installation meets all relevant building codes and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners that cannot handle the intended load. | Always select fasteners made of compatible stainless steel (e.g., 304 or 316) with sufficient shear and tensile strength for the calculated loads. |
| Inadequate surface preparation leading to potential galvanic corrosion when in contact with dissimilar metals. | Ensure all contact surfaces are clean and free from contaminants. Consider using insulating washers or coatings between the stainless steel sheet and other metals if galvanic corrosion is a concern. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing in seismic zones, Custom suspending systems for industrial equipment, Reinforcement plates for load-bearing assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||