This robust 304 stainless steel stock sheet provides exceptional corrosion resistance and mechanical strength for critical lubricating system components. Precisely manufactured for reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.637" |
| Length | 17" |
| Width | 30" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet boasts a precise thickness of 0.637 inches, a length of 17 inches, and a width of 30 inches. Composed of an austenitic chromium-nickel alloy, it exhibits excellent corrosion resistance, formability, and weldability, making it ideal for fabrication of wear plates, guide rails, and protective coverings within high-friction or corrosive lubricating environments. Its inherent durability ensures longevity and reduced maintenance cycles in machinery and processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to the design specifications for the component. 3. Secure the stock sheet using appropriate fastening methods (e.g., welding, bolting) as dictated by the application's load and vibration requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or premature wear. | Ensure all surfaces are meticulously cleaned and degreased before installation. |
| Using incorrect fastening methods that compromise structural integrity. | Consult engineering drawings or specifications to select the most suitable and robust fastening techniques for the intended application. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Wear plates in conveyor systems, Guide rails for automated machinery, Protective coverings for lubrication reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||