This 304 stainless steel stock sheet is engineered for demanding pneumatic systems. Offering exceptional corrosion resistance and mechanical strength, it ensures reliable performance in harsh industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.987" |
| Length | 42" |
| Width | 19" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet measures 0.987 inches in thickness, 42 inches in length, and 19 inches in width. The austenitic 304 stainless steel composition provides excellent resistance to atmospheric corrosion, many organic and inorganic chemicals, and oxidizing solutions. Its high tensile strength and formability make it ideal for fabricating custom pneumatic components, housings, and structural elements requiring robust performance and longevity. This material is certified to meet stringent industry standards for pneumatic system integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully inspect the sheet for any surface defects or damage prior to cutting. 2. Utilize appropriate cutting tools (e.g., laser, waterjet, or abrasive saw) to achieve precise dimensions. 3. Deburr all cut edges thoroughly to prevent material fatigue and ensure smooth operation within pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 304 stainless steel for applications exposed to moisture, chemicals, or high humidity to prevent premature corrosion and system failure. |
| Inadequate edge preparation after cutting. | Ensure all cut edges are properly deburred and smoothed to prevent stress concentrations and potential leaks in sealed pneumatic components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic cylinder fabrication, Enclosures for pneumatic control panels, Wear-resistant components in air preparation units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||