This heavy-duty 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Precisely manufactured to 0.551" thickness, it provides a robust solution for demanding lubrication system components and industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.551" |
| Length | 18" |
| Width | 34" |
Engineered for reliability and performance, this 304 stainless steel stock sheet measures 0.551 inches in thickness, 18 inches in length, and 34 inches in width. Composed of a chromium-nickel alloy, 304 stainless steel exhibits excellent resistance to corrosion, oxidation, and a wide range of chemical environments, making it ideal for components within lubricating systems such as splash guards, bearing supports, and flow dividers. Its non-porous surface also minimizes contamination and wear, ensuring extended service life in high-stress industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to design specifications and mark any necessary cutouts or mounting points. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring a stable and flush fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong cutting tool for stainless steel, leading to heat buildup and material deformation. | Employ a high-speed steel or carbide cutting tool specifically designed for stainless steel, utilizing a slow feed rate and adequate lubrication. |
| Inadequate surface preparation before installation, resulting in poor adhesion or premature wear. | Ensure the sheet and the mounting surface are meticulously cleaned and degreased using industrial solvents prior to assembly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Components for industrial lubricating systems, Splash guards and containment barriers, Bearing and shaft support structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||