This 304 stainless steel stock sheet is precision-manufactured for demanding lubricating applications. Its robust construction ensures exceptional performance and longevity in corrosive environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.291" |
| Length | 22" |
| Width | 16" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers a nominal thickness of 0.291 inches (7.39 mm), a length of 22 inches (558.8 mm), and a width of 16 inches (406.4 mm). Composed primarily of chromium (18%) and nickel (8%), it exhibits excellent resistance to oxidation and corrosion, making it ideal for environments requiring smooth, low-friction surfaces or contact with lubricating fluids. Its non-magnetic nature and superior formability further enhance its utility in custom fabrication and component manufacturing within the lubricating industry.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free from contaminants. 2. Carefully position the stock sheet according to the design requirements. 3. Secure the sheet using appropriate fastening methods, ensuring minimal stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard grade stainless steel for lubricating applications. | Always select lubricating grade stainless steel for optimal performance and corrosion resistance in these specific environments. |
| Inadequate surface preparation before fabrication. | Thoroughly clean and deburr all edges and surfaces to prevent premature wear or contamination of lubricant. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Bearing race components, Guide rails for sliding mechanisms, Custom lubricant reservoir fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||