This 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for demanding suspending and bracing applications. Its robust 0.125" thickness ensures structural integrity in various industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.125" |
| Length | 14" |
| Width | 32" |
Manufactured under strict quality controls, this 0.125" thick stock sheet is fabricated from premium 304 (18/8) stainless steel, renowned for its excellent corrosion resistance, weldability, and high tensile strength. The sheet measures 14" in width and 32" in length, offering ample material for custom fabrication. Its non-magnetic properties and resistance to a wide range of chemicals make it ideal for environments where hygiene and durability are paramount. This material is engineered to withstand significant loads and environmental stresses, ensuring long-term performance in critical infrastructure and industrial assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the sheet for precise cutting according to project requirements. 2. Utilize appropriate cutting tools (e.g., shear, plasma cutter) for clean edges. 3. Fasten securely using compatible hardware (e.g., bolts, welding) suitable for 304 stainless steel, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners that will corrode and compromise the integrity of the assembly. | Always use 304 stainless steel fasteners to maintain corrosion resistance and ensure long-term structural stability. |
| Improper cutting techniques leading to burrs or weakened edges. | Employ sharp, appropriate cutting tools and deburr edges thoroughly after cutting to maintain material integrity and safety. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom brackets and hangers, Structural supports for piping and conduit, Reinforcement plates in mechanical assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||