This robust 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, ideal for critical suspending and bracing applications in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.777" |
| Length | 32" |
| Width | 27" |
Built to exacting engineering tolerances, this 0.777-inch thick, 32-inch long, and 27-inch wide stock sheet is fabricated from premium 304 stainless steel. This austenitic chromium-nickel alloy provides excellent resistance to corrosion, oxidation, and pitting, making it suitable for a wide range of industrial, marine, and food processing applications where hygiene and longevity are paramount. Its substantial thickness ensures superior structural integrity for heavy-duty load-bearing and bracing requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately mark and cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 2. Prepare mounting surfaces and pre-drill holes for fasteners, ensuring alignment with intended attachment points. 3. Securely fasten the sheet using corrosion-resistant hardware, such as stainless steel bolts, washers, and nuts, to the structural members for effective suspending and bracing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using carbon steel fasteners which will corrode and stain the stainless steel. | Always use 304 or 316 grade stainless steel fasteners to maintain the integrity and appearance of the installation. |
| Improper cutting techniques leading to work hardening and reduced corrosion resistance. | Utilize sharp tooling and appropriate cutting speeds and lubrication when cutting stainless steel to minimize heat and prevent damage. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing in corrosive environments, Custom fabrication for marine and offshore platforms, Support structures in food processing and chemical plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||