This robust 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Its substantial 0.887-inch thickness ensures superior structural integrity for critical applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.887" |
| Length | 27" |
| Width | 14" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet is fabricated to stringent tolerances. With a precise thickness of 0.887 inches, a generous length of 27 inches, and a width of 14 inches, it provides ample material for complex fabrication and structural components. The inherent properties of 304 stainless steel, including its excellent corrosion resistance and high tensile strength, make it ideal for use in chemical processing, food and beverage manufacturing, marine environments, and heavy machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Verify the sheet dimensions against project requirements. 3. Proceed with cutting, shaping, and fastening according to engineered drawings and applicable industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified for load-bearing applications. | Always consult engineering specifications and select a stock sheet thickness that adequately supports the intended load and stress factors. |
| Inadequate surface preparation before welding or fastening. | Thoroughly clean the stainless steel surface to remove any oils, grease, or contaminants that could compromise joint integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural Supports and Bracing, Custom Machine Components, Corrosion-Resistant Enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||