This 0.288" thick 304 stainless steel stock sheet offers superior corrosion resistance and durability. Precisely manufactured to 20" x 39", it's an essential component for demanding electrical and lighting applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.288" |
| Length | 20" |
| Width | 39" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet meets stringent performance requirements. Its 0.288" nominal thickness, coupled with a 20" width and 39" length, provides a substantial material volume for fabrication. Composed of approximately 18% chromium and 8% nickel, it exhibits excellent resistance to oxidation and corrosion, making it ideal for harsh environments and extended service life in electrical enclosures, lighting fixtures, and control panels. The material's inherent strength and formability facilitate complex design integration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Prepare cutting and forming equipment according to standard sheet metal fabrication practices for 304 stainless steel. 3. Fabricate and install using appropriate fasteners and sealing methods to ensure enclosure integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can cause galling or work hardening. | Utilize carbide-tipped or high-speed steel cutting tools specifically designed for stainless steel, employing appropriate lubrication and feed rates. |
| Inadequate grounding or bonding in electrical enclosures. | Ensure all fabricated components are properly grounded and bonded according to electrical codes and industry best practices to prevent static discharge and ensure safety. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosures, Lighting Fixture Housings, Industrial Control Panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||