This heavy-gauge 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for critical suspending and bracing applications. Its robust dimensions ensure reliable support in challenging industrial and marine settings.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.965" |
| Length | 22" |
| Width | 26" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet offers superior durability and corrosion resistance, critical for demanding suspending and bracing applications. With a substantial thickness of 0.965 inches, and dimensions of 22 inches in length by 26 inches in width, it meets rigorous industrial standards. The inherent properties of 304 stainless steel, including its high tensile strength and resistance to oxidation and chemical attack, make this sheet an ideal choice for environments exposed to moisture, saltwater, or corrosive substances. Its precise fabrication ensures consistent performance and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully position the stock sheet at the intended bracing or suspension point. 2. Securely fasten the sheet using appropriate high-strength, corrosion-resistant fasteners (e.g., stainless steel bolts and nuts). 3. Verify structural integrity by applying appropriate load tests as per project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or non-corrosion-resistant fasteners. | Always use fasteners rated for the expected load and environmental conditions, preferably 304 or 316 stainless steel. |
| Inadequate load bearing calculations leading to overstressing the sheet. | Perform thorough engineering analysis to determine the required load capacity and ensure the sheet's specifications exceed the calculated maximum stress. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural support for heavy machinery, Marine and offshore bracing systems, Industrial piping and conduit suspension.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||