This 0.992-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and durability. Precisely manufactured to 36" x 37", it's an essential component for rigorous fabrication and inspection tasks.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.992" |
| Length | 36" |
| Width | 37" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.992" (25.20 mm) in thickness, 36" (914.4 mm) in length, and 37" (939.8 mm) in width. Composed of a chromium-nickel alloy, it provides excellent resistance to oxidation and general corrosion, along with good formability and weldability. The material's high tensile strength and low magnetic permeability make it suitable for environments requiring high hygiene standards and resistance to aggressive substances, such as in food processing, chemical, and pharmaceutical industries, as well as for precision tooling and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity prior to cutting or fabrication. 2. Utilize appropriate cutting tools designed for high-grade stainless steel to avoid material degradation. 3. Ensure proper handling and storage to maintain surface finish and prevent contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can cause galling and heat distortion. | Employ carbide-tipped or diamond-coated cutting tools specifically designed for stainless steel, along with adequate coolant. |
| Improper storage leading to scratching or contamination. | Store sheets flat on a non-abrasive surface in a dry environment, ideally with protective film intact until ready for use. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision fabrication and machining, Corrosion-resistant enclosures and structures, Custom tooling and jig construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||