High-strength 304 stainless steel stock sheet, precisely manufactured for robust suspending and bracing solutions. Offers exceptional durability and corrosion resistance in demanding environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.734" |
| Length | 35" |
| Width | 20" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet features a nominal thickness of 0.734 inches (18.64 mm), a length of 35 inches (889 mm), and a width of 20 inches (508 mm). Composed of a chromium-nickel alloy, it exhibits superior resistance to oxidation and corrosion, making it ideal for applications exposed to moisture, chemicals, or extreme temperatures. Its high tensile strength and yield strength ensure structural integrity for critical load-bearing components in suspending and bracing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure substrate is clean and free of debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and mounting hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inadequate fasteners for the load requirements. | Always select fasteners with a shear and tensile strength sufficient to support the anticipated load, considering dynamic forces. |
| Improper surface preparation leading to premature corrosion or adhesion failure. | Thoroughly clean and degrease both the sheet and the mounting surface before installation to ensure optimal performance and longevity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing, Industrial suspension systems, Corrosion-resistant enclosures and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||