This robust 304 stainless steel stock sheet offers superior corrosion resistance and durability. Precisely cut to 0.999" thickness, 33" length, and 22" width, it's ready for demanding fabrication projects.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.999" |
| Length | 33" |
| Width | 22" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet conforms to industry standards for mechanical strength and chemical inertness. Its 0.999-inch thickness provides substantial rigidity for structural applications, while the 33-inch length and 22-inch width offer ample surface area for cutting, bending, and welding. The alloy's inherent passivity layer ensures excellent resistance to oxidation and a wide range of corrosive environments, making it suitable for food processing, chemical handling, and architectural uses where hygiene and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the sheet using appropriate marking tools. 2. Employ a suitable sawing or cutting method (e.g., band saw, abrasive chop saw) with appropriate blades or abrasive wheels designed for stainless steel. 3. Ensure proper material support during cutting to prevent binding and maintain cut accuracy.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to poor cut quality and increased heat generation. | Utilize sharp, high-quality cutting tools specifically designed for stainless steel. Maintain appropriate cutting speeds and feed rates to minimize heat buildup and ensure clean cuts. |
| Improper handling of large sheets, resulting in damage or personal injury. | Always use appropriate lifting equipment for heavy sheets. Secure the sheet properly before cutting to prevent uncontrolled movement. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Fabrication & Machining, Industrial Equipment Components, Architectural Cladding & Trim.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||