This robust 304 stainless steel stock sheet, measuring 0.974 inches thick, 26 inches in length, and 44 inches in width, is engineered for critical lubricating systems. Its high-quality material ensures exceptional durability and corrosion resistance.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.974" |
| Length | 26" |
| Width | 44" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a precise thickness of 0.974 inches, a length of 26 inches, and a width of 44 inches. Fabricated from premium 304 stainless steel, it exhibits excellent tensile strength, ductility, and superior resistance to a wide range of corrosive media commonly encountered in lubricating environments. This makes it ideal for fabricating components within fluid handling systems, bearing supports, and other industrial equipment where wear and corrosion mitigation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is free from any surface contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools. 3. Deburr all cut edges to prevent material fatigue and ensure smooth operation within the lubricating system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge finishing after cutting. | Always deburr and smooth all cut edges to prevent stress risers and potential damage to adjacent components or fluid media. |
| Using the sheet in environments with aggressive chloride concentrations exceeding its rated limits. | Verify the operating environment's chemical composition to ensure it falls within the corrosion resistance parameters of 304 stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Lubricating system component fabrication, Bearing housing and support structures, Fluid containment and transfer channels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||