This robust 304 stainless steel stock sheet provides a stable and accurate surface for critical measuring and inspection operations. Its substantial thickness ensures rigidity and dimensional stability in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.973" |
| Length | 21" |
| Width | 14" |
Engineered for reliability and performance, this 0.973-inch thick stock sheet is manufactured from high-grade 304 stainless steel, renowned for its excellent corrosion resistance, formability, and weldability. Measuring 21 inches in length and 14 inches in width, its precise dimensions make it ideal for use as a reference surface in metrology, a calibration standard, or a component in specialized inspection fixtures. The material's non-magnetic properties and resistance to a wide range of chemicals ensure its suitability for sensitive applications in food processing, chemical, and pharmaceutical industries, as well as general manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free from debris. 2. Position the 304 stainless steel stock sheet onto the prepared surface. 3. Secure the sheet using appropriate fasteners (e.g., countersunk screws, clamps) at designated intervals, ensuring uniform pressure and preventing any warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to sheet instability. | Thoroughly clean and ensure the mounting surface is perfectly level before installation. |
| Over-tightening fasteners, causing potential deformation of the sheet. | Use a calibrated torque wrench and apply even pressure during fastening to avoid warping. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision Measuring Surface, Calibration Standard, Inspection Fixture Base.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||