This substantial 304 stainless steel stock sheet offers superior strength and corrosion resistance for demanding suspending and bracing applications. Its robust dimensions ensure structural integrity in critical installations.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.966" |
| Length | 30" |
| Width | 19" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.966 inches in thickness, 30 inches in length, and 19 inches in width. Fabricated from premium 304 austenitic stainless steel, it provides exceptional resistance to corrosion, oxidation, and pitting, making it ideal for harsh environments. The material's high tensile strength and ductility allow for reliable fabrication and load-bearing capabilities, ensuring longevity and performance in structural support systems, heavy-duty bracing, and custom fabrication projects requiring robust material properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project requirements. 2. Precisely mark cutting and drilling locations according to design specifications. 3. Securely fasten the sheet using appropriate grade 304 stainless steel hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade fasteners that do not match the structural demands or material compatibility. | Always select fasteners made from 304 stainless steel with a tensile strength rating sufficient for the intended load and application. |
| Inadequate surface preparation leading to premature corrosion or compromised adhesion of coatings if applied. | Thoroughly clean the sheet surface to remove oils, grease, and any contaminants before installation or further processing. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing in industrial facilities, Custom suspension systems for large equipment, Support plates and gussets in high-stress environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||