This 304 Stainless Steel stock sheet offers exceptional strength and corrosion resistance, ideal for fabricating robust pneumatic components and enclosures. Its precise dimensions ensure seamless integration into demanding industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.926" |
| Length | 47" |
| Width | 45" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.926 inches in thickness, 47 inches in length, and 45 inches in width. Composed of austenitic stainless steel, it exhibits excellent resistance to atmospheric corrosion, many organic and inorganic chemicals, and food processing environments due to its chromium and nickel content. This material's non-magnetic nature and formability make it suitable for custom fabrication of pressure vessels, enclosures, and structural components within pneumatic systems where hygiene and chemical inertness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity against project specifications. 2. Clean the sheet surface to remove any contaminants prior to fabrication. 3. Fabricate components using appropriate cutting, bending, and welding techniques for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments. | Always select 304 stainless steel for applications exposed to moisture, chemicals, or high humidity to prevent premature corrosion and failure. |
| Inadequate surface preparation before welding. | Thoroughly clean the weld area of grease, oil, and any other contaminants to ensure proper weld fusion and prevent inclusions. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic system enclosures, Custom fabricated pneumatic manifolds, Corrosion-resistant component bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||