High-grade 304 stainless steel stock sheet, engineered for robust suspending and bracing applications. Offers exceptional strength, durability, and resistance to corrosion in harsh environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.843" |
| Length | 23" |
| Width | 28" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.843 inches thick, 23 inches in length, and 28 inches in width. Composed of a minimum of 10.5% chromium and 7% nickel, it provides excellent resistance to general corrosion, pitting, and crevice corrosion. This material's inherent strength and formability make it ideal for custom fabrication of structural supports, mounting brackets, and bracing components in chemical processing, food and beverage, marine, and architectural sectors where hygiene and longevity are paramount. Meets ASTM A240 standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark desired cut lines on the stock sheet. 2. Utilize appropriate cutting tools (e.g., abrasive cutoff wheel, plasma cutter, or waterjet) for precise material removal. 3. Prepare edges for welding or fastening according to fabrication drawings and industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material degradation or uneven edges. | Employ cutting tools specifically designed for stainless steel, ensuring proper speed and coolant if applicable. |
| Inadequate edge preparation for welding, resulting in compromised joint integrity. | Bevel edges as required by welding procedures and ensure surfaces are clean and free from contaminants. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Bracing Systems, Structural Supports, Industrial Mounting Hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||