This 304 stainless steel stock sheet is engineered for superior performance in lubricating systems. Its robust construction ensures longevity and reliability in demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.838" |
| Length | 41" |
| Width | 17" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.838 inches in thickness, 41 inches in length, and 17 inches in width. The inherent properties of 304 stainless steel, including excellent corrosion resistance, high tensile strength, and a non-galling surface finish, make it ideal for components within lubricating systems. This material's formability and weldability also allow for custom fabrication to meet specific application requirements, ensuring optimal fluid management and reduced friction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Accurately position the stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques, verifying structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or sealing. | Thoroughly clean and degrease the mounting surface before installation to ensure optimal contact and prevent contamination. |
| Over-tightening fasteners, causing deformation of the sheet. | Use torque-controlled fastening or a systematic tightening pattern to avoid stressing the material and maintain flatness. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Wear plates in bearing housings, Guide rails for sliding components, Reservoir components for lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||