This robust 304 stainless steel stock sheet offers superior durability and corrosion resistance, making it an indispensable component for critical measuring and inspection tasks. Engineered for precision and longevity in demanding industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.795" |
| Length | 48" |
| Width | 31" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is manufactured to precise tolerances, ensuring dimensional accuracy for critical applications. With a substantial thickness of 0.795 inches and dimensions of 48 inches in length by 31 inches in width, it provides a stable and reliable surface for calibration, jig construction, and inspection fixtures. The 304 grade stainless steel alloy offers excellent resistance to corrosion and oxidation, maintaining its integrity across a wide range of operating conditions. Its non-magnetic properties are crucial for applications involving sensitive electronic components or magnetic fields. This material is readily machinable and weldable, facilitating seamless integration into custom setups and robust assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean, dry, and free from debris. 2. Carefully position the 304 stainless steel stock sheet according to the design specifications, ensuring it is level and securely supported. 3. If required, proceed with fastening or integrating the sheet into the larger assembly using appropriate hardware or welding techniques, adhering to all safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet as a primary structural load-bearing component without proper engineering analysis. | Consult engineering drawings and perform load calculations to verify suitability for structural applications. This sheet is primarily for measuring and inspecting. |
| Exposing the sheet to aggressive chemicals or environments that exceed the corrosion resistance of 304 stainless steel. | Refer to material compatibility charts and avoid exposure to strong acids, chlorides, and harsh industrial cleaners unless specifically tested and approved. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision Measuring Surfaces, Inspection Fixtures and Jigs, Calibration Standards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||