This robust 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Precisely manufactured to your specifications, it's the ideal base for demanding abrading and polishing applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.776" |
| Length | 29" |
| Width | 21" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet exhibits a nominal thickness of 0.776 inches (19.7 mm), a length of 29 inches (736.6 mm), and a width of 21 inches (533.4 mm). Composed of an austenitic chromium-nickel alloy, it provides excellent formability, weldability, and superior resistance to atmospheric corrosion and many organic and inorganic chemical agents. Its non-magnetic nature and inherent strength make it suitable for a wide array of industrial and decorative uses where surface integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the 304 stainless steel sheet for optimal fit and alignment. 3. Secure the sheet using appropriate fasteners or welding techniques based on the application's structural requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect abrasive grit for the desired finish on stainless steel. | Consult material compatibility charts and begin with a coarser grit, progressively moving to finer grits to achieve the target surface roughness. |
| Introducing contaminants during the polishing process, leading to localized corrosion. | Utilize dedicated, clean polishing tools and compounds. Avoid cross-contamination with ferrous materials or other incompatible substances. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication for industrial equipment, High-performance abrasive media backing, Decorative architectural elements requiring a polished finish.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||