This robust 304 stainless steel stock sheet provides a stable and corrosion-resistant surface ideal for precise layout, fabrication, and inspection tasks in demanding industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.774" |
| Length | 34" |
| Width | 26" |
A proven choice for industrial professionals, this 0.774-inch thick stock sheet is manufactured from high-grade 304 stainless steel, renowned for its exceptional corrosion resistance, durability, and non-magnetic properties. Measuring 34 inches in length and 26 inches in width, this material offers a substantial, flat surface suitable for critical metrology, die making, tooling, and as a foundational element for complex assemblies. Its inherent strength and resistance to a wide range of chemicals make it ideal for harsh or sterile environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free of debris. 2. Carefully position the stock sheet to align with pre-drilled mounting holes or desired layout. 3. Secure the stock sheet using appropriate fasteners (e.g., stainless steel bolts, screws) at regular intervals to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using non-stainless steel fasteners that can corrode and stain the sheet. | Always use 304 or 316 stainless steel fasteners to maintain the integrity and appearance of the stock sheet. |
| Improper handling leading to scratches or dents on the critical surface. | Utilize non-marring handling equipment and store the sheet on a protected surface when not in use. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision layout and marking surfaces, Workholding and fixturing bases, Corrosion-resistant work surfaces for fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||