Engineered for demanding applications, this 0.721-inch thick 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for critical suspending and bracing projects.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.721" |
| Length | 14" |
| Width | 30" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet boasts a precise thickness of 0.721 inches, a length of 14 inches, and a width of 30 inches. Composed of a chromium-nickel alloy, it offers superior tensile strength and a high yield point, making it ideal for structural support in environments prone to moisture, chemicals, or high temperatures. Its inherent passivity layer ensures long-term corrosion resistance, preventing galvanic corrosion and maintaining structural integrity under significant load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Precisely mark the desired mounting points for the sheet, accounting for any pre-drilled holes. 3. Secure the stock sheet using appropriate fasteners (e.g., bolts, rivets) with sufficient load-bearing capacity, ensuring a tight and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners. | Select fasteners (bolts, screws, rivets) with a diameter and material strength rating that exceeds the anticipated load and is compatible with 304 stainless steel to prevent galvanic corrosion. |
| Mounting on a weak or unstable substrate. | Thoroughly inspect and reinforce the substrate to ensure it can safely support the weight and dynamic loads that the installed bracing will encounter. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing in industrial facilities, Support components for marine or chemical processing equipment, Custom fabricated mounting plates for high-stress applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||