This robust 304 stainless steel stock sheet is engineered for extreme environments. Its superior corrosion resistance and mechanical integrity make it ideal for fabricating critical components in lubricating systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.710" |
| Length | 46" |
| Width | 31" |
Purpose-built for heavy-duty applications, this 0.710-inch thick stock sheet offers exceptional structural integrity for demanding industrial environments. Fabricated from high-quality 304 stainless steel, it exhibits excellent resistance to corrosion, oxidation, and chemical attack, ensuring longevity in contact with various lubricants and operating fluids. The generous dimensions of 46 inches in length and 31 inches in width provide ample material for custom fabrication of bearing housings, pump components, fluid reservoirs, and protective shielding within advanced lubrication and fluid handling systems. Its polished surface finish minimizes friction and wear in sliding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project requirements. 2. Safely cut to size using appropriate industrial cutting tools (e.g., waterjet, plasma cutter, abrasive saw). 3. Machine or form edges and surfaces as per design specifications, ensuring deburring for safety and performance. 4. Weld or fasten components using compatible 304 stainless steel fasteners or welding consumables and procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for lubricant-contacting components. | Always utilize corrosion-resistant materials like 304 stainless steel to prevent rust and contamination of lubricating fluids. |
| Inadequate edge finishing after cutting, leading to potential system damage. | Thoroughly deburr and smooth all cut edges to prevent particulate generation and potential damage to seals or moving parts within the lubrication system. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty industrial lubrication systems, Corrosive fluid handling components, Bearing and seal housing fabrication, Custom pump and valve components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||