This robust 304 stainless steel stock sheet is engineered for demanding pneumatic applications. Its superior corrosion resistance and dimensional stability ensure reliable performance in harsh environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.707" |
| Length | 38" |
| Width | 19" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet offers exceptional durability and resistance to a wide range of corrosive media, making it ideal for pneumatic systems operating under challenging conditions. With a precise thickness of 0.707 inches, a generous length of 38 inches, and a width of 19 inches, this sheet provides ample material for fabricating custom pneumatic components such as enclosures, manifolds, and structural elements. The inherent strength and non-magnetic properties of 304 stainless steel further enhance its suitability for critical pneumatic operations where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with surrounding pneumatic system components and fluids. 2. Precisely cut the stock sheet to the required dimensions using appropriate metal cutting tools and safety equipment. 3. Deburr all cut edges thoroughly to prevent potential damage to seals or personnel. Ensure all mounting holes are drilled to the specified diameter and tolerance before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive pneumatic environments. | Always select 304 stainless steel or equivalent for applications exposed to moisture, chemicals, or high-pressure gases to prevent premature corrosion and system failure. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to prevent leaks, damage to seals, and to ensure safe handling during installation and maintenance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic enclosures and housings, High-pressure manifold fabrication, Corrosion-resistant pneumatic component construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||