This robust 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Its substantial 0.693" thickness makes it ideal for heavy-duty industrial suspending and bracing applications where reliability is paramount.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.693" |
| Length | 48" |
| Width | 28" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet boasts a nominal thickness of 0.693 inches, a width of 28 inches, and a length of 48 inches. Manufactured from high-grade 304 stainless steel, it exhibits superior corrosion resistance, tensile strength, and durability, making it suitable for environments prone to moisture, chemicals, and high stress loads. This material is certified to ASTM A240 standards, ensuring consistent performance in structural support and bracing systems, including overhead installations and heavy equipment mounting.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely mark and cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 3. Securely fasten the sheet using heavy-duty fasteners (e.g., bolts, rivets) designed for structural applications, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners instead of stainless steel. | Always use 304 or 316 stainless steel fasteners to prevent galvanic corrosion and ensure long-term integrity of the assembly. |
| Inadequate load bearing calculations for bracing applications. | Consult engineering specifications or a qualified engineer to determine the precise load requirements and ensure the sheet and its fasteners are appropriately sized. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing, Industrial equipment mounting plates, Custom support structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||