This 304 stainless steel stock sheet offers robust performance for material handling applications. Its superior corrosion resistance and dimensional stability ensure longevity and reliability in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.678" |
| Length | 35" |
| Width | 38" |
Built to exacting engineering tolerances, this 0.678-inch thick sheet of 304 stainless steel provides exceptional strength and formability. Measuring 35 inches in length and 38 inches in width, it meets stringent industry standards for material handling components. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and general corrosion, make it ideal for applications involving exposure to chemicals, moisture, and extreme temperatures. This sheet is suitable for fabricating custom trays, chutes, platforms, and structural elements within material processing and logistics systems, ensuring hygienic surfaces and structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely position the 304 stainless steel stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) in accordance with load requirements and structural design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning before installation, leading to surface contamination. | Thoroughly clean the stainless steel surface with a mild detergent and water, followed by a clean water rinse and dry to remove any oils or debris. |
| Over-tightening fasteners, causing deformation or stress risers. | Utilize calibrated torque wrenches to tighten fasteners to the specified torque values, ensuring even distribution of stress. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Fabrication of Material Handling Equipment, Corrosion-Resistant Liners for Hoppers and Chutes, Structural Components in Food Processing and Pharmaceutical Industries.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||