This 0.664" thick 304 stainless steel stock sheet offers superior corrosion resistance and durability. Precisely sized at 28" x 43", it's ideal for robust suspending and bracing solutions in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.664" |
| Length | 28" |
| Width | 43" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet is manufactured to exacting standards for critical load-bearing applications. Measuring 0.664 inches in thickness, 28 inches in length, and 43 inches in width, it provides substantial material for fabricating robust suspending and bracing components. The inherent properties of 304 stainless steel, including its excellent tensile strength, weldability, and resistance to a wide range of corrosive media, ensure long-term performance and structural integrity in diverse industrial, marine, and chemical processing environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately cut the sheet to the required dimensions for the specific suspending or bracing component. 2. Prepare edges for welding or fastening according to design specifications, ensuring clean surfaces. 3. Fabricate and install the component, adhering to all structural load and safety requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper material selection for the intended corrosive environment. | Verify the chemical compatibility of 304 stainless steel with the specific media it will encounter before fabrication and installation. |
| Inadequate consideration of weld heat-affected zones (HAZ) for critical structural applications. | Employ proper welding procedures and post-weld treatments to maintain the corrosion resistance and mechanical properties of the HAZ. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural bracing in corrosive atmospheres, Custom suspending hardware for industrial equipment, Marine and offshore platform support components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||