This high-grade 304 stainless steel stock sheet provides a robust and dimensionally stable surface for critical measuring and inspection tasks. Engineered for accuracy and longevity in demanding environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.657" |
| Length | 20" |
| Width | 43" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet features a precise thickness of 0.657 inches, a length of 20 inches, and a width of 43 inches. Its 304 stainless steel composition offers excellent corrosion resistance, superior strength, and non-magnetic properties, making it ideal for fabricating precision jigs, fixtures, inspection surfaces, and as a foundational component in metrology equipment. The controlled tolerances ensure flatness and dimensional stability crucial for accurate measurements and reliable performance in industrial and laboratory settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Position the stock sheet carefully onto the prepared surface, aligning it with designated markings or supports. 3. Secure the stock sheet using appropriate fasteners, ensuring even pressure distribution to maintain flatness and prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to sheet deformation. | Use a torque wrench set to the manufacturer's recommended specification for each fastener type. |
| Installing on an uneven or unstable surface, compromising measurement accuracy. | Verify the mounting surface is perfectly level and rigid before installation, using shims if necessary. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision measuring tables, Inspection fixtures and gauges, Laboratory work surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||