Engineered for superior durability and corrosion resistance, this substantial 0.650" thick 304 stainless steel stock sheet provides a robust foundation for critical lubricating system components and demanding industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.650" |
| Length | 43" |
| Width | 17" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures a nominal 0.650 inches in thickness, 43 inches in length, and 17 inches in width. Composed of AISI 304 stainless steel, it exhibits excellent resistance to corrosion, oxidation, and a wide range of chemicals, making it suitable for environments where lubrication systems are exposed to harsh conditions. The material's inherent strength and formability facilitate precise fabrication for custom manifold blocks, bearing support structures, and fluid containment units within lubricating machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions against design specifications. 2. Prepare edges for joining or machining according to fabrication requirements. 3. Implement appropriate welding, fastening, or machining techniques for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or drilling without proper lubrication and speed control, leading to excessive heat and potential work hardening. | Employ high-speed steel (HSS) or carbide-tipped cutting tools specifically designed for stainless steel. Maintain appropriate cutting speeds and use copious amounts of cutting fluid to dissipate heat and prevent galling. |
| Allowing contact with carbon steel during fabrication or storage, leading to potential cross-contamination and subsequent rust formation. | Ensure all fabrication areas and tools are clean and free from carbon steel contamination. Store the stainless steel sheet on non-carbon steel surfaces and protect it with temporary coverings if necessary. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Lubricating Manifold Fabrication, Heavy-Duty Bearing Support Structures, Corrosion-Resistant Fluid Containment Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||