This 304 stainless steel stock sheet offers superior corrosion resistance and durability. Its robust 0.636" thickness ensures exceptional strength for demanding shipping and packaging requirements.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.636" |
| Length | 47" |
| Width | 47" |
Trusted by engineers across multiple sectors, this 304 stainless steel sheet meets ASTM A240 standards, guaranteeing consistent material integrity. Measuring 0.636 inches thick, 47 inches in length, and 47 inches in width, it provides a substantial surface area for custom fabrication. The austenitic 304 grade offers excellent weldability and formability, along with high resistance to a broad spectrum of corrosive environments, making it ideal for heavy-duty crates, protective enclosures, and specialized packaging solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely measure and mark cut lines based on design requirements. 3. Utilize appropriate cutting tools (e.g., plasma cutter, shear) for precise fabrication, adhering to safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper support, leading to edge deformation. | Employ guided cutting methods and ensure adequate support during cutting to maintain edge squareness and integrity. |
| Neglecting to deburr edges after cutting, creating potential hazards and compromising fit. | Thoroughly deburr all cut edges to remove sharp fragments and ensure a smooth, safe finish. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty shipping crates, Corrosion-resistant packaging enclosures, Protective bulkheads and dividers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||