This 304 stainless steel stock sheet provides a robust and precise surface for critical measuring and inspection tasks in harsh industrial settings. Its substantial thickness and durable material ensure longevity and accuracy.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.627" |
| Length | 44" |
| Width | 21" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, crucial for accurate measurement and inspection. With a nominal thickness of 0.627 inches, a length of 44 inches, and a width of 21 inches, it provides a stable and expansive platform. The 304 stainless steel alloy (UNS S30400) ensures superior performance in wet or corrosive conditions, making it ideal for fabricating custom inspection fixtures, calibration standards, and robust work surfaces in manufacturing, quality control, and laboratory applications. Its non-magnetic properties further enhance its utility in sensitive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and capable of supporting the sheet's weight and operational loads. 2. Position the stock sheet precisely on the prepared surface, verifying alignment with any required datums or fixtures. 3. Secure the sheet using appropriate fasteners (e.g., countersunk screws, clamps) at recommended intervals to prevent warping and ensure flatness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate support leading to surface deflection. | Utilize a rigid and precisely leveled sub-structure with sufficient support points to maintain sheet flatness under load. |
| Improper fastener selection or tightening, causing stress points or distortion. | Employ fasteners recommended for stainless steel, and tighten them incrementally in a pattern to distribute stress evenly, avoiding over-tightening. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom inspection fixture fabrication, Calibration standard bases, Durable laboratory work surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||