This 0.625" thick, 16" x 47" sheet of 304 stainless steel is specifically selected for its superior corrosion resistance and non-galling properties, making it ideal for lubricating applications where friction reduction and material integrity are paramount.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.625" |
| Length | 16" |
| Width | 47" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial 0.625-inch thickness, ensuring robust structural integrity and resistance to deformation under load. Its 16-inch width and 47-inch length provide ample material for fabrication in demanding environments. The austenitic 304 grade offers excellent formability, weldability, and superior resistance to a wide range of corrosive media, including many acids, salts, and food-grade substances. This makes it an optimal choice for components within bearing assemblies, sliding mechanisms, food processing equipment, and marine hardware where reduced friction and long-term durability are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any surface contaminants. 2. Fabricate the component according to design specifications, ensuring precise tolerances. 3. Integrate the fabricated part into the lubricating system, verifying smooth operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade stainless steel that may corrode in the intended environment. | Always confirm the material grade meets the specific chemical and environmental resistance requirements of the application. |
| Improper handling leading to surface scratching or contamination, which can impede lubricating performance. | Handle the sheet with care, utilizing protective coverings and ensuring a clean fabrication environment. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Bearing and Bushing Components, Sliding Mechanism Elements, Food and Beverage Processing Equipment Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||