This robust 304 stainless steel stock sheet offers superior corrosion resistance and durability. Its substantial 0.535" thickness makes it ideal for high-stress lubricating applications where reliability is paramount.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.535" |
| Length | 14" |
| Width | 13" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet is engineered for exceptional performance. Measuring 0.535 inches in thickness, 14 inches in length, and 13 inches in width, it leverages the inherent benefits of 304 stainless steel, including excellent tensile strength, formability, and resistance to a wide range of corrosive agents. This makes it a critical component in lubrication systems, bearing assemblies, and high-wear surfaces within chemical processing, food and beverage manufacturing, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Precisely align the sheet with the intended application area. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation. | Thoroughly clean and degrease the mounting surface to ensure optimal adhesion and prevent premature wear. |
| Over-tightening fasteners, leading to material deformation. | Use torque-controlled fasteners and tighten them gradually and evenly to avoid compromising the sheet's structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Bearing race fabrication, Wear strip material for sliding components, Component in high-pressure lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||