This 304 stainless steel stock sheet provides a robust and corrosion-resistant substrate for demanding abrading and polishing applications. Its precise dimensions and material integrity ensure consistent performance in industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.524" |
| Length | 15" |
| Width | 18" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a thickness of 0.524 inches, a length of 15 inches, and a width of 18 inches. The 304 grade offers excellent corrosion resistance, particularly against oxidizing acids, and exhibits good formability and weldability. This makes it ideal for fabricating custom polishing fixtures, abrasive backing plates, and wear-resistant components in environments subject to moderate chemical exposure and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Verify the sheet is free from any surface damage prior to integration. 3. Securely mount the sheet using appropriate fasteners or bonding agents as dictated by the application's design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always utilize compatible stainless steel fasteners (304 or higher grade) to prevent corrosion at the fastening points. |
| Inadequate surface preparation before bonding or welding. | Thoroughly clean and degrease the mating surfaces of the 304 stainless steel sheet to ensure optimal adhesion or weld integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom abrasive backing plates, Wear-resistant components in processing equipment, Fixtures for precision polishing operations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||