This robust 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Precisely manufactured to 0.523" thickness, 28" length, and 24" width, it's engineered for demanding pneumatic system components and environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.523" |
| Length | 28" |
| Width | 24" |
Engineered for reliability and performance, this 304 stainless steel stock sheet provides exceptional durability for critical pneumatic systems. Measuring 0.523 inches in thickness, 28 inches in length, and 24 inches in width, it leverages the inherent benefits of 304 stainless steel, including its outstanding resistance to corrosion, oxidation, and a wide range of chemicals. This makes it an ideal material for constructing enclosures, mounting brackets, and structural components within aggressive or humid pneumatic environments, ensuring longevity and consistent operational efficiency under demanding conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully position the sheet according to design requirements. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments. | Utilize 304 stainless steel for its inherent corrosion resistance, preventing premature failure and system contamination. |
| Improperly aligning mounting holes. | Precisely measure and mark all mounting hole locations before drilling to ensure perfect alignment with mating components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic control panel fabrication, Custom enclosure construction for air preparation units, Structural supports for pneumatic actuators and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||