This 304 stainless steel stock sheet is engineered for demanding lubrication applications. Its robust construction and material properties ensure long-term performance and reliability in corrosive environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 31" |
| Width | 18" |
Built to exacting engineering tolerances, this 0.469-inch thick 304 stainless steel sheet offers superior corrosion resistance and mechanical strength. The 31-inch length and 18-inch width provide ample material for fabricating complex lubrication system components, such as reservoirs, manifolds, and protective housings. Its non-reactive nature makes it ideal for handling various lubricants without degradation, ensuring system integrity and efficient operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any manufacturing residues. 2. Cut the sheet to the required dimensions using appropriate metalworking tools. 3. Fabricate and assemble components according to design specifications, ensuring proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for lubricant contact surfaces. | Utilize 304 stainless steel to prevent corrosion and potential lubricant contamination. |
| Inadequate material thickness for load-bearing components. | Verify the sheet thickness meets the structural requirements of the intended application. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Lubrication system reservoirs and tanks, Oil and grease manifolds, Protective covers for pumping mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||