This 304 stainless steel stock sheet offers superior corrosion resistance and durability for demanding lubricating system components. Its precise dimensions ensure seamless integration into critical industrial machinery.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.452" |
| Length | 34" |
| Width | 17" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is manufactured to exacting tolerances. With a thickness of 0.452 inches, a length of 34 inches, and a width of 17 inches, it provides a substantial surface area for custom fabrication. The 304 grade offers excellent resistance to oxidation and corrosion, making it ideal for environments where exposure to chemicals or moisture is prevalent, common in lubricating systems and fluid handling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or premature wear. | Thoroughly degrease and clean the mounting surface before installation. |
| Over-tightening fasteners, causing stress concentrations and potential material fatigue. | Use a calibrated torque wrench to tighten fasteners to the manufacturer's recommended specifications. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Lubricant reservoir fabrication, Custom bearing housing construction, Guide rail and track manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||