Engineered for robust structural support, this 0.437-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and exceptional tensile strength for demanding suspending and bracing applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.437" |
| Length | 37" |
| Width | 14" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet is fabricated to exacting standards, measuring 0.437 inches in thickness, 37 inches in length, and 14 inches in width. Its 304 grade composition provides excellent resistance to a broad spectrum of corrosive environments, including atmospheric conditions, food processing chemicals, and various industrial solvents. This material's inherent durability and mechanical properties make it an ideal choice for critical load-bearing components in chemical processing plants, marine structures, food and beverage facilities, and architectural bracing systems where long-term reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and cut the stock sheet to the required dimensions using appropriate cutting tools for stainless steel. 2. Prepare mounting surfaces to ensure a clean and stable foundation for attachment. 3. Securely fasten the sheet using compatible stainless steel fasteners and appropriate bracing techniques as dictated by the specific application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always utilize 304 or 316 grade stainless steel fasteners to maintain material integrity and prevent premature failure. |
| Insufficient load calculation leading to undersized or improperly supported bracing. | Perform thorough structural analysis and consult engineering load charts to ensure adequate support and prevent structural collapse. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing in industrial facilities, Custom mounting platforms for equipment in corrosive environments, Support structures for piping and conduit systems in chemical plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||