Engineered for performance, this 0.423" thick 304 stainless steel stock sheet (25" x 35") provides exceptional durability and corrosion resistance. Its robust composition makes it a critical component in demanding lubricating systems, ensuring longevity and operational integrity.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.423" |
| Length | 25" |
| Width | 35" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet offers superior performance characteristics for lubricating applications. Measuring a precise 0.423 inches in thickness, with dimensions of 25 inches in length and 35 inches in width, this material exhibits excellent tensile strength and formability. Its inherent resistance to corrosion and staining from various lubricants ensures prolonged service life and minimizes contamination risks in critical machinery and processing equipment. This grade is ideal for fabricating components subjected to moderate to severe friction and wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean and free from debris or contaminants. 2. Accurately cut the stock sheet to the required dimensions for the specific component. 3. Securely fasten the fabricated component within the lubricating system, adhering to all design specifications and tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel susceptible to corrosion from specific lubricants. | Always verify the compatibility of 304 stainless steel with the intended lubricating fluid to prevent premature degradation and system failure. |
| Inadequate edge finishing leading to potential material fatigue or lubricant leakage. | Ensure all cut edges are properly deburred and smoothed to maintain material integrity and prevent sharp points that could compromise sealing. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom bearing housings in high-wear machinery, Component fabrication for automated lubrication systems, Splash guards and deflectors in industrial lubrication setups.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||