This 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, making it the ideal substrate for rigorous abrading and polishing operations. Engineered for demanding industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.413" |
| Length | 27" |
| Width | 44" |
A high-performance industrial component, this 304 stainless steel stock sheet measures 0.413 inches in thickness, with dimensions of 27 inches in length and 44 inches in width. Fabricated from UNS S30400, it exhibits excellent tensile strength and ductility, crucial for forming and withstanding abrasive forces. Its austenitic microstructure provides inherent corrosion resistance to a wide range of environments, preventing premature degradation during high-friction processes. This material is particularly suited for custom fabrication of polishing pads, abrasive backing plates, and wear-resistant surfaces in manufacturing and finishing lines.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the stock sheet according to application requirements. 3. Secure the sheet using appropriate fasteners or bonding agents, ensuring even pressure distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before mounting. | Thoroughly clean and degrease both the stock sheet and mounting surface to ensure optimal adhesion and prevent contamination. |
| Uneven fastening leading to sheet distortion. | Utilize a systematic fastening pattern with controlled torque to maintain flatness and structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Abrasive backing for grinding and sanding operations, Custom polishing pad substrates, Wear plates in material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||