This 304 stainless steel stock sheet is engineered for demanding abrading and polishing environments. Its robust construction ensures longevity and superior performance in challenging industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.409" |
| Length | 20" |
| Width | 46" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet measures 0.409 inches thick, 20 inches in length, and 46 inches in width. Fabricated from high-grade 304 stainless steel, it exhibits excellent corrosion resistance, particularly against a wide range of atmospheric and chemical agents. Its inherent strength and ductility make it ideal for fabrication processes such as cutting, bending, and welding, while its polished surface finish is suitable for direct use in abrasive applications or as a substrate for further surface treatment. Typical uses include manufacturing of polishing machinery components, wear plates, and custom abrading fixtures where material integrity and resistance to wear are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface ensuring it is clean, dry, and free of debris. 2. Accurately position the 304 stainless steel stock sheet according to design specifications. 3. Secure the sheet using appropriate mechanical fasteners or welding techniques, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or premature failure. | Thoroughly clean and degrease both the mounting surface and the stainless steel sheet before installation. |
| Using incorrect fasteners or welding procedures that compromise the material's integrity or corrosion resistance. | Utilize fasteners and welding consumables specifically recommended for 304 stainless steel to maintain alloy properties. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Manufacturing of abrasion-resistant components, Custom polishing equipment fabrication, Wear plates and protective shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||