This 304 stainless steel stock sheet provides exceptional corrosion resistance and structural integrity for critical pneumatic system components. Precisely manufactured for reliable performance in harsh environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.357" |
| Length | 48" |
| Width | 17" |
Built to exacting engineering tolerances, this 0.357" thick, 48" long, and 17" wide stock sheet is fabricated from premium 304 stainless steel. This austenitic alloy offers superior resistance to a wide range of corrosive media, making it ideal for high-pressure pneumatic lines, valve bodies, and manifold blocks in environments exposed to moisture, chemicals, or aggressive atmospheres. Its inherent strength and ductility ensure long-term operational reliability and precise component fit within complex pneumatic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut to the required dimensions using appropriate cutting tools for stainless steel. 3. Deburr all edges to prevent material fatigue and ensure proper sealing surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 304 stainless steel for its inherent corrosion resistance and longevity in challenging conditions. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to prevent stress risers and ensure leak-free connections. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic valve components, Manifold blocks, High-pressure pneumatic tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||