Engineered for demanding environments, this 0.352" thick 304 stainless steel stock sheet offers superior corrosion resistance and structural integrity for custom suspending and bracing applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.352" |
| Length | 21" |
| Width | 37" |
Precision-manufactured to tight tolerances, this 0.352" (nominal gauge approximately 3/8") 304 stainless steel stock sheet provides exceptional durability and resistance to oxidation and pitting, even in highly corrosive atmospheres. Its robust mechanical properties ensure reliable performance for load-bearing applications. The dimensions of 21" x 37" offer a versatile platform for fabricating custom brackets, hangers, structural supports, and bracing components. This material is ideal for marine, chemical processing, food and beverage, and outdoor installations where longevity and hygiene are paramount. Compliance with ASTM A240 standards ensures material quality and traceability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Design and template custom components based on project requirements and sheet dimensions. 2. Precisely cut the 304 stainless steel stock sheet using appropriate industrial cutting equipment (e.g., plasma cutter, waterjet). 3. Fabricate and form the cut material into the desired suspending or bracing elements, ensuring all edges are deburred and smooth. Weld or mechanically fasten components as per engineering specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify 304 or 316 stainless steel for applications exposed to moisture, chemicals, or salt spray to prevent rust and premature failure. |
| Inadequate edge finishing after cutting. | Thoroughly deburr and smooth all cut edges to prevent sharp hazards and potential stress concentration points, which can compromise structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom structural bracing and supports, Heavy-duty suspension systems, Marine and offshore equipment fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||