This 304 stainless steel stock sheet offers robust performance for lubricating systems. Its superior corrosion resistance and formability make it ideal for custom fabrication and demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.341" |
| Length | 21" |
| Width | 38" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet is precisely dimensioned at 0.341 inches thick, 21 inches in length, and 38 inches in width. Composed of 18% chromium and 8% nickel, it provides exceptional resistance to oxidation and corrosion, crucial for wet or chemical environments common in lubricating applications. The material's inherent strength and ductility allow for easy cutting, bending, and welding, enabling the creation of custom chutes, trays, guards, and housings that effectively manage and protect lubricating fluids and components, ensuring operational efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the installation area thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to the design specifications for your lubricating system. 3. Secure the sheet using appropriate fasteners or welding techniques, ensuring a leak-proof and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong gauge for the application's load-bearing requirements. | Consult engineering drawings and perform load calculations to ensure the 0.341" thickness is adequate for anticipated stresses and support. |
| Inadequate edge preparation before welding, leading to porosity or weak joints. | Ensure all edges are properly beveled and cleaned of any oil, grease, or mill scale prior to welding to achieve strong, defect-free welds. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated oil pans and sumps, Slide plates and guides in conveyor systems, Protective covers for lubrication points.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||