This robust 0.253" thick 304 stainless steel stock sheet offers superior corrosion resistance and durability. Measuring 27"x34", it's ideal for fabricating custom components in lubricating systems and demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.253" |
| Length | 27" |
| Width | 34" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is manufactured to meet stringent quality standards. Its 0.253" thickness provides exceptional structural integrity for heavy-duty applications. Composed of 18% chromium and 8% nickel, this alloy exhibits excellent resistance to oxidation and a wide range of corrosive media, making it suitable for use in chemical processing, food and beverage manufacturing, and marine environments where lubrication system components are critical. The sheet's dimensions of 27" length and 34" width offer ample material for custom fabrication of slides, guides, and containment trays within lubricating machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any oils, greases, or debris. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools. 3. Deburr all cut edges to ensure a smooth finish and prevent potential hazards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments. | Always specify 304 stainless steel for applications involving moisture, chemicals, or high salinity to prevent premature corrosion and failure. |
| Not properly de-burring cut edges. | Thoroughly deburr all cut edges after fabrication to eliminate sharp points and ensure safe handling and operation of components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated wear plates for conveyor systems, Corrosion-resistant containment trays for lubricant reservoirs, Guide rails and support structures in high-humidity manufacturing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||