This 304 stainless steel stock sheet offers superior corrosion resistance and durability for demanding industrial environments. Its robust construction makes it ideal for a wide range of lubricating and fabrication applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.218" |
| Length | 25" |
| Width | 28" |
A high-performance industrial component, this 304 stainless steel stock sheet boasts a nominal thickness of 0.218 inches, a length of 25 inches, and a width of 28 inches. Fabricated from AISI 304 stainless steel, it exhibits excellent resistance to a broad spectrum of corrosive media, including atmospheric conditions and many organic and inorganic chemicals, due to its chromium and nickel content. This material's inherent non-magnetic nature and good formability make it suitable for custom fabrication in environments where hygiene or chemical inertness is critical. Its tensile strength and yield strength ensure structural integrity under moderate loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the stock sheet. 2. Utilize appropriate cutting tools for stainless steel (e.g., plasma cutter, abrasive saw). 3. Smooth all edges and surfaces to remove burrs and sharp points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and reduced corrosion resistance. | Employ dedicated stainless steel cutting tools and ensure thorough cleaning of the workpiece and tooling. |
| Overheating the material during fabrication, which can cause discoloration and alter its metallurgical properties. | Use adequate cooling methods during cutting and welding operations. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom bearing cages, Lubricant containment trays, Corrosion-resistant fabrication components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||