This 304 stainless steel stock sheet provides a robust and accurate surface for critical measurement and inspection applications. Its material properties ensure dimensional stability and resistance to corrosion in demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.206" |
| Length | 34" |
| Width | 17" |
A proven choice for industrial professionals, this 0.206-inch thick 304 stainless steel stock sheet offers superior rigidity and dimensional stability, essential for precise measuring and inspecting. Measuring 34 inches in length and 17 inches in width, its 304 stainless steel composition delivers excellent corrosion resistance, tolerating a wide range of chemicals and environmental conditions. This makes it ideal for use as a reference surface, layout plate, or for fabricating custom inspection fixtures where accuracy and longevity are paramount. The material's non-magnetic properties (in annealed condition) can also be advantageous in certain sensitive inspection setups.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove any debris or contaminants. 2. Precisely position the 304 stainless steel stock sheet, ensuring it is level and stable. 3. Secure the sheet using appropriate mounting hardware (e.g., screws, clamps) through pre-drilled holes or along the edges, maintaining flatness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a non-flat mounting surface | Ensure the supporting surface is perfectly level and rigid before installing the stock sheet to maintain its own flatness and accuracy. |
| Over-tightening mounting hardware, causing distortion | Apply mounting hardware evenly and with moderate torque, avoiding localized pressure points that could warp the stainless steel sheet. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision Layout and Marking, Inspection Surface for Machined Parts, Fixture Base for Measurement Tools.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||