This 304 stainless steel stock sheet provides robust material for fabricating custom suspending and bracing solutions. Its inherent strength and corrosion resistance ensure long-term performance in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.204" |
| Length | 16" |
| Width | 37" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet offers superior strength and corrosion resistance, essential for critical suspending and bracing applications. With a thickness of 0.204 inches, a length of 16 inches, and a width of 37 inches, it meets stringent industry standards. The 304 alloy provides excellent durability against environmental degradation, making it ideal for chemical processing, food and beverage, marine, and architectural projects where longevity and hygiene are paramount. Its formability allows for precise customization to fit unique structural requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., waterjet, laser, or abrasive saw) to achieve precise dimensions. 3. Fabricate and install the custom components using approved welding, fastening, or bending techniques, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for bracing applications. | Always select fasteners with shear and tensile strength ratings that exceed the anticipated loads based on engineering calculations. |
| Inadequate edge preparation before welding. | Ensure all edges are clean, free from mill scale, oil, and other contaminants, and properly beveled if required for full penetration welds. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom cable trays and supports, Structural bracing components, Fabricated brackets and mounting plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||