This 0.143" thick 304 stainless steel stock sheet, measuring 41" x 14", is engineered for superior performance in abrading and polishing applications. Its robust construction ensures longevity and resistance to wear.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.143" |
| Length | 41" |
| Width | 14" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a nominal thickness of 0.143 inches (approximately 3.63 mm), a length of 41 inches (1041.4 mm), and a width of 14 inches (355.6 mm). Composed of an austenitic chromium-nickel alloy, it offers excellent corrosion resistance, formability, and weldability, making it ideal for demanding industrial environments. The material's inherent strength and durability contribute to its effectiveness in surface preparation and finishing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully position the stock sheet to align with the intended application. 3. Secure the sheet using appropriate fixturing or clamping methods as per project requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grit abrasives for the desired finish. | Select abrasives based on the specific surface finish requirements, starting with coarser grits and progressing to finer grits as needed. |
| Applying excessive heat during polishing, leading to material distortion. | Employ cooling techniques such as misting or intermittent polishing to manage heat buildup and prevent thermal damage to the stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Surface preparation for coating and bonding, Metal finishing and deburring, Component fabrication for corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||